document number: 42099 for technical questions, contact: tantalum@v ishay.com www.vishay.com revision: 27-may-10 1 wet tantalum capacitor, button, all-tantalum case, non-polar, - 55 c to + 125 c operation series anp2 vishay introduction this conveniently-packaged no n-polar button unit employs a non-solid electrolyte, and has a sintered tantalum anode. the anode is produced from medium capacitance powder and the lower cv product allows a tighter specification of capacitance stability, dissipation factor and leakage current. the cathode is also of tantalum, and overcomes the restrictions of a silver cathode system in allowing a high ripple current rating. the anp2 capacitor is based up on the ch capacitor design, but with twin tantalum electrodes made of sintered compacts of high purity tant alum powder. the dielectric layer of tantalum pentoxide is formed on each compact to withstand rated voltage. this enables the capacitor to be used where dc bias may fluctuate positively or negatively. the system is then enclosed between a tantalum plate and a tantalum cup, with an outer nickel case. the seal is a highly effi cient system comprising a ptfe gasket clamped between coined plates of tantalum by a work-hardened nickel ring. this type of seal, common to all button styles, is largely respon sible for their long life and high reliability under severe military environments. the combination of the tant alum pentoxide dielectric stability and the extremely efficient seal has been shown to ensure that there is no significant difference in electrical parameters or instant use beha viour after 10 years storage or longer. a shelf life in excess of 20 years is confidently expected. there are four types of terminations and mounting options are available. these include a treated stud or bolt, pcb pins, a tab for panels, and ribbons leads slotted through-holes. these are illustrated in the photograph, and dimensional table drawing. applications the anp series is designed fo r use in general military and professional applications. for example: power supply smoothing, filter networks , switching, by-pass, timer functions, and where re verse potential occur. weight the anp2 style with a stud termination weighs approximately 18.1 g, including the nut. the anp2 styles, which has a printed circuit board mounting, weighs approximately 17.3 g. features ? all-tantalum electrodes eliminate silver migration ? withstands high ripple current ? long life reliability ? non-polar design ? mounting: through-hole performance characteristics operating temperature: - 55 c to + 125 c voltage range: 3 v dc to 75 v dc capacitance range: 33 f to 470 f specifications environmental classification: 55/125/56 vibration: 10 hz to 2000 hz, 0.75 mm or 98 m/s 2 , 150 h bump: 390 m/s 2 , 4000 bumps shock: 981 m/s 2 acceleration: 981 m/s 2 low air pressure: 1 kpa reverse voltage capability the anp2 employs twin tantalum electrodes, which allows the continuous application of full rated voltage in both directions. surge voltage the surge voltage capability is 115 % of the voltage rating at the relevant temperature. temperature range the capacitor is designed for operation between - 55 c and + 125 c, with linear voltage derating above + 85 c to 66 % of the rated volt age at + 125 c. capacitance tolerance the standard capacitance tolerance is 20 % although special tolerances are available by arrangement.
www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 42099 2 revision: 27-may-10 series anp2 vishay wet tantalum capacitor, butto n, all-tantalum case, non-polar, - 55 c to + 125 c operation application information capacitors may be operated at less than the rated voltage, resulting in significantly reduced leakage current values. in timing circuits, or other applications where the device is subjected only to a dc vo ltage, the ballistic or dc capacitance will be somewhat larger than measured at 50 hz. the parametric info rmation must necessarily be brief, although additional comprehensive data is available on request, and the tests tailored to customers requirements can be made. reliability all capacitors are subjected to burn-in. this is to remove infant mortalities and ensure reliability. the capacitor lifetime is enhanced when the unit is subjected to a reduced ripple current, a low ambient temperature, and is externally cooled. the use of a heat sink is recommended. ordering procedure example: anp2c (220 f, 10 v dc ) vishay part number: anp2b227m010a notes ? all dimensions are in mm, and are maximum unless otherwise stated (1) for c case size, case height is 8.5 mm (2) width of anode tag 4.22 mm max. ordering information anp2 c 227 m 100 a - model case code capacitance tolerance voltage termination and packaging see ratings and case codes table this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow m = 20 % (std) k = 10 % (special order) this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an r (6r3 = 6.3 v) a = stud b = pc mount pins c = twin tag or ribbon d = panel or potting tag blank = standard (tin/lead coating) dimensions in millimeters the anp2 series is comprised of two case si zes, differing in depth of cu p only. the case size dimensions are shown in the table . four mounting styles are available in both case sizes. abcdefghj k crs. l crs. m dia. n nom. p dia. qrs t dia. u crs. v dia. w nom. 3.6 6.7 (1) 21.8 8.4 (2) 8.4 16.2 8.4 1.8 0.8 20.3 10.2 1.1 2.4 13.1 1.0 7.5 10.7 1.6 13.0 3.5 0.30 e f 4 ba shakeproof nut a b d - + g h 20 s.w.g. h.t.d. nickel mounting holes m dia. j l crs. k crs. - + + - n hole q dia. this mounting style is suitable for panel thickness of up to 1.2 mm + - s r w p u crs. hole t dia. mounting holes v dia. stud pc pins potting tag twin tag or ribbons (2)
document number: 42099 for technical questions, contact: tantalum@v ishay.com www.vishay.com revision: 27-may-10 3 series anp2 wet tantalum capacitor, button, all-tantalum case, non-polar, - 55 c to + 125 c operation vishay notes ? (1) = capacitance tolerance: m = 20 % standard k = 10 % special order ? (2) = termination type: a = stud or bolt b = pins for pcb c = twin tags or ribbons d = potting tag ratings and case codes vishay part numbers case code cap. at 50 hz (f) voltage dissipation factor at 50 hz (%) impedance at 100 khz ( ) leakage current (a) c at 50 hz (%) 85 c 125 c 25 c 125 c 25 c - 55 c 25 c 125 c - 55 c 125 c anp2c226(1)075(2) c 22 75 50 3.0 3.0 1.0 5.0 2.0 50 - 5.0 12.5 anp2b156(1)075(2) b 15 75 50 3.0 3.0 1.0 5.0 2.0 50 - 5.0 12.5 anp2c336(1)050(2) c 33 50 33.3 5.0 6.0 1.0 5.0 2.0 50 - 10 12.5 anp2b226(1)050(2) b 22 50 33.3 5.0 6.0 1.0 5.0 2.0 50 - 10 12.5 anp2c476(1)040(2) c 47 40 26.6 6.0 7.0 1.0 5.0 2.0 50 - 15 12.5 anp2b336(1)040(2) b 33 40 26.6 6.0 7.0 1.0 5.0 2.0 50 - 15 12.5 anp2c686(1)030(2) c 68 30 20 8.0 10 1.0 5.0 2.0 50 - 20 12.5 anp2b476(1)030(2) b 47 30 20 8.0 10 1.0 5.0 2.0 50 - 20 12.5 anp2c107(1)020(2) c 100 20 13.4 10 12 1.0 5.0 2.0 50 - 30 12.5 anp2b686(1)020(2) b 68 20 13.4 10 12 1.0 5.0 2.0 50 - 30 12.5 anp2c157(1)015(2) c 150 15 10 12 15 1.0 5.0 2.0 50 - 30 12.5 anp2b107(1)015(2) b 100 15 10 10 12 1.0 5.0 2.0 50 - 30 12.5 anp2c227(1)010(2) c 220 10 6.6 15 20 1.0 5.0 2.0 50 - 35 12.5 anp2b157(1)010(2) b 150 10 6.6 12 15 1.0 5.0 2.0 50 - 30 12.5 anp2c337(1)006(2) c 330 6 4 20 30 1.0 5.0 2.0 50 - 35 15 anp2b227(1)006(2) b 220 6 4 15 20 1.0 5.0 2.0 50 - 35 15 anp2c477(1)003(2) c 470 3 2 25 38 1.0 5.0 2.0 50 - 40 25 anp2b337(1)003(2) b 330 3 2 20 30 1.0 5.0 2.0 50 - 40 20 cross reference vishay part number arcotronics part number nato part number anp2c226m075a 402/1/50040/002 5910-99-014-3038 anp2b156m075a 402/1/50039/001 5910-99-014-3037 anp2c336m050a 402/1/50040/003 5910-99-014-3040 anp2b226m050a 402/1/50039/002 5910-99-014-3039 anp2c476m040a 402/1/50040/004 5910-99-014-3042 anp2b336m040a 402/1/50039/003 5910-99-014-3041 anp2c686m030a 402/1/50040/005 5910-99-014-3044 anp2b476m030a 402/1/50039/004 5910-99-014-3043 anp2c107m020a 402/1/50040/006 5910-99-014-3046 anp2b686m020a 402/1/50039/005 5910-99-014-3045 anp2c157m015a 402/1/50040/007 5910-99-014-3048 anp2b107m015a 402/1/50039/006 5910-99-014-3047 anp2c227m010a 402/1/50040/008 5910-99-014-3050 anp2b157m010a 402/1/50039/007 5910-99-014-3049 anp2c337m006a 402/1/50040/009 5910-99-014-3052
www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 42099 4 revision: 27-may-10 series anp2 vishay wet tantalum capacitor, butto n, all-tantalum case, non-polar, - 55 c to + 125 c operation anp2b227m006a 402/1/50039/008 5910-99-014-3051 anp2c477m003a 402/1/50040/010 5910-99-014-3055 anp2b337m003a 402/1/50039/009 5910-99-014-3053 anp2c226k075a 402/1/50040/022 n/a anp2b156k075a 402/1/50039/021 n/a anp2c336k050a 402/1/50040/023 n/a anp2b226k050a 402/1/50039/022 n/a anp2c476k040a 402/1/50040/024 n/a anp2b336k040a 402/1/50039/023 n/a anp2c686k030a 402/1/50040/025 n/a anp2b476k030a 402/1/50039/024 n/a anp2c107k020a 402/1/50040/026 n/a anp2b686k020a 402/1/50039/025 n/a anp2c157k015a 402/1/50040/027 n/a anp2b107k015a 402/1/50039/026 n/a anp2c227k010a 402/1/50040/028 n/a anp2b157k010a 402/1/50039/027 n/a anp2c337k006a 402/1/50040/029 n/a anp2b227k006a 402/1/50039/028 n/a anp2c477k003a 402/1/50040/030 n/a anp2b337k003a 402/1/50039/029 n/a anp2c226m075d 402/1/50042/002 5910-99-014-3102 anp2b156m075d 402/1/50041/001 5910-99-014-3101 anp2c336m050d 402/1/50042/003 5910-99-014-3104 anp2b226m050d 402/1/50041/002 5910-99-014-3103 anp2c476m040d 402/1/50042/004 5910-99-014-3106 anp2b336m040d 402/1/50041/003 5910-99-014-3105 anp2c686m030d 402/1/50042/005 5910-99-014-3108 anp2b476m030d 402/1/50041/004 5910-99-014-3107 anp2c107m020d 402/1/50042/006 5910-99-014-3110 anp2b686m020d 402/1/50041/005 5910-99-014-3109 anp2c157m015d 402/1/50042/007 5910-99-014-3112 anp2b107m015d 402/1/50041/006 5910-99-014-3111 anp2c227m010d 402/1/50042/008 5910-99-014-3114 anp2b157m010d 402/1/50041/007 5910-99-014-3113 anp2c337m006d 402/1/50042/009 5910-99-014-3116 anp2b227m006d 402/1/50041/008 5910-99-014-3115 anp2c477m003d 402/1/50042/010 5910-99-014-3118 anp2b337m003d 402/1/50041/009 5910-99-014-3117 anp2c226k075d 402/1/50042/022 n/a anp2b156k075d 402/1/50041/021 n/a anp2c336k050d 402/1/50042/023 n/a anp2b226k050d 402/1/50041/022 n/a anp2c476k040d 402/1/50042/024 n/a cross reference vishay part number arcotronics part number nato part number
document number: 42099 for technical questions, contact: tantalum@v ishay.com www.vishay.com revision: 27-may-10 5 series anp2 wet tantalum capacitor, button, all-tantalum case, non-polar, - 55 c to + 125 c operation vishay anp2b336k040d 402/1/50041/023 n/a anp2c686k030d 402/1/50042/025 n/a anp2b476k030d 402/1/50041/024 n/a anp2c107k020d 402/1/50042/026 n/a anp2b686k020d 402/1/50041/025 n/a ANP2C157K015D 402/1/50042/027 n/a anp2b107k015d 402/1/50041/026 n/a anp2c227k010d 402/1/50042/028 n/a anp2b157k010d 402/1/50041/027 n/a anp2c337k006d 402/1/50042/029 n/a anp2b227k006d 402/1/50041/028 n/a anp2c477k003d 402/1/50042/030 n/a anp2b337k003d 402/1/50041/029 n/a anp2c226m075b 402/1/50150/002 5910-99-014-3070 anp2b156m075b 402/1/50149/001 5910-99-014-3069 anp2c336m050b 402/1/50150/003 5910-99-014-3072 anp2b226m050b 402/1/50149/002 5910-99-014-3071 anp2c476m040b 402/1/50150/004 5910-99-014-3074 anp2b336m040b 402/1/50149/003 5910-99-014-3073 anp2c686m030b 402/1/50150/005 5910-99-014-3076 anp2b476m030b 402/1/50149/004 5910-99-014-3075 anp2c107m020b 402/1/50150/006 5910-99-014-3078 anp2b686m020b 402/1/50149/005 5910-99-014-3077 anp2c157m015b 402/1/50150/007 5910-99-014-3080 anp2b107m015b 402/1/50149/006 5910-99-014-3079 anp2c227m010b 402/1/50150/008 5910-99-014-3082 anp2b157m010b 402/1/50149/007 5910-99-014-3081 anp2c337m006b 402/1/50150/009 5910-99-014-3084 anp2b227m006b 402/1/50149/008 5910-99-014-3083 anp2c477m003b 402/1/50150/010 5910-99-014-3086 anp2b337m003b 402/1/50149/009 5910-99-014-3085 anp2c226k075b 402/1/50150/022 n/a anp2b156k075b 402/1/50149/021 n/a anp2c336k050b 402/1/50150/023 n/a anp2b226k050b 402/1/50149/022 n/a anp2c476k040b 402/1/50150/024 n/a anp2b336k040b 402/1/50149/023 n/a anp2c686k030b 402/1/50150/025 n/a anp2b476k030b 402/1/50149/024 n/a anp2c107k020b 402/1/50150/026 n/a anp2b686k020b 402/1/50149/025 n/a anp2c157k015b 402/1/50150/027 n/a anp2b107k015b 402/1/50149/026 n/a anp2c227k010b 402/1/50150/028 n/a cross reference vishay part number arcotronics part number nato part number
www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 42099 6 revision: 27-may-10 series anp2 vishay wet tantalum capacitor, butto n, all-tantalum case, non-polar, - 55 c to + 125 c operation anp2b157k010b 402/1/50149/027 n/a anp2c337k006b 402/1/50150/029 n/a anp2b227k006b 402/1/50149/028 n/a anp2c477k003b 402/1/50150/030 n/a anp2b337k003b 402/1/50149/029 n/a anp2c226m075c 402/1/50044/002 n/a anp2b156m075c 402/1/50043/001 n/a anp2c336m050c 402/1/50044/003 n/a anp2b226m050c 402/1/50043/002 n/a anp2c476m040c 402/1/50044/004 n/a anp2b336m040c 402/1/50043/003 n/a anp2c686m030c 402/1/50044/005 n/a anp2b476m030c 402/1/50043/004 n/a anp2c107m020c 402/1/50044/006 n/a anp2b686m020c 402/1/50043/005 n/a anp2c157m015c 402/1/50044/007 n/a anp2b107m015c 402/1/50043/006 n/a anp2c227m010c 402/1/50044/008 n/a anp2b157m010c 402/1/50043/007 n/a anp2c337m006c 402/1/50044/009 n/a anp2b227m006c 402/1/50043/008 n/a anp2c477m003c 402/1/50044/010 n/a anp2b337m003c 402/1/50043/009 n/a anp2c226k075c 402/1/50044/022 n/a anp2b156k075c 402/1/50043/021 n/a anp2c336k050c 402/1/50044/023 n/a anp2b226k050c 402/1/50043/022 n/a anp2c476k040c 402/1/50044/024 n/a anp2b336k040c 402/1/50043/023 n/a anp2c686k030c 402/1/50044/025 n/a anp2b476k030c 402/1/50043/024 n/a anp2c107k020c 402/1/50044/026 n/a anp2b686k020c 402/1/50043/025 n/a anp2c157k015c 402/1/50044/027 n/a anp2b107k015c 402/1/50043/026 n/a anp2c227k010c 402/1/50044/028 n/a anp2b157k010c 402/1/50043/027 n/a anp2c337k006c 402/1/50044/029 n/a anp2b227k006c 402/1/50043/028 n/a anp2c477k003c 402/1/50044/030 n/a anp2b337k003c 402/1/50043/029 n/a cross reference vishay part number arcotronics part number nato part number
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
